| Postgres новости | Статьи | База скриптов | Вопрос-Ответ | Форумы | О нас | Книги |
поиск:
Полезные ссылки

  • Форум по PostgreSQL

  • Оптимизация PostgreSQL

  • Вопросы по PostgreSQL

  • Книги по PostgreSQL

  • PostgreSQL.org


    • Базы данных

  • MySQL

  • PostgreSQL


    • PHP конференция 2005
    Подробности!

    PostgreSQL 8.0.1 Documentation
    PrevFast BackwardChapter 29. ECPG - Embedded SQL in CFast ForwardNext

    29.9. Error Handling

    This section describes how you can handle exceptional conditions and warnings in an embedded SQL program. There are several nonexclusive facilities for this.

    29.9.1. Setting Callbacks

    One simple method to catch errors and warnings is to set a specific action to be executed whenever a particular condition occurs. In general:

    EXEC SQL WHENEVER condition action;

    condition can be one of the following:

    SQLERROR

    The specified action is called whenever an error occurs during the execution of an SQL statement.

    SQLWARNING

    The specified action is called whenever a warning occurs during the execution of an SQL statement.

    NOT FOUND

    The specified action is called whenever an SQL statement retrieves or affects zero rows. (This condition is not an error, but you might be interested in handling it specially.)

    action can be one of the following:

    CONTINUE

    This effectively means that the condition is ignored. This is the default.

    GOTO label
    GO TO label

    Jump to the specified label (using a C goto statement).

    SQLPRINT

    Print a message to standard error. This is useful for simple programs or during prototyping. The details of the message cannot be configured.

    STOP

    Call exit(1), which will terminate the program.

    BREAK

    Execute the C statement break. This should only be used in loops or switch statements.

    CALL name (args)
    DO name (args)

    Call the specified C functions with the specified arguments.

    The SQL standard only provides for the actions CONTINUE and GOTO (and GO TO).

    Here is an example that you might want to use in a simple program. It prints a simple message when a warning occurs and aborts the program when an error happens.

    EXEC SQL WHENEVER SQLWARNING SQLPRINT;EXEC SQL WHENEVER SQLERROR STOP;

    The statement EXEC SQL WHENEVER is a directive of the SQL preprocessor, not a C statement. The error or warning actions that it sets apply to all embedded SQL statements that appear below the point where the handler is set, unless a different action was set for the same condition between the first EXEC SQL WHENEVER and the SQL statement causing the condition, regardless of the flow of control in the C program. So neither of the two following C program excerpts will have the desired effect.

    /* * WRONG */int main(int argc, char *argv[]){ ... if (verbose) { EXEC SQL WHENEVER SQLWARNING SQLPRINT; } ... EXEC SQL SELECT ...; ...}

    /* * WRONG */int main(int argc, char *argv[]){ ... set_error_handler(); ... EXEC SQL SELECT ...; ...}static void set_error_handler(void){ EXEC SQL WHENEVER SQLERROR STOP;}

    29.9.2. sqlca

    For more powerful error handling, the embedded SQL interface provides a global variable with the name sqlca that has the following structure:

    struct{ char sqlcaid[8]; long sqlabc; long sqlcode; struct { int sqlerrml; char sqlerrmc[70]; } sqlerrm; char sqlerrp[8]; long sqlerrd[6]; char sqlwarn[8]; char sqlstate[5];} sqlca;

    (In a multithreaded program, every thread automatically gets its own copy of sqlca. This works similarly to the handling of the standard C global variable errno.)

    sqlca covers both warnings and errors. If multiple warnings or errors occur during the execution of a statement, then sqlca will only contain information about the last one.

    If no error occurred in the last SQL statement, sqlca.sqlcode will be 0 and sqlca.sqlstate will be "00000". If a warning or error occurred, then sqlca.sqlcode will be negative and sqlca.sqlstate will be different from "00000". A positive sqlca.sqlcode indicates a harmless condition, such as that the last query returned zero rows. sqlcode and sqlstate are two different error code schemes; details appear below.

    If the last SQL statement was successful, then sqlca.sqlerrd[1] contains the OID of the processed row, if applicable, and sqlca.sqlerrd[2] contains the number of processed or returned rows, if applicable to the command.

    In case of an error or warning, sqlca.sqlerrm.sqlerrmc will contain a string that describes the error. The field sqlca.sqlerrm.sqlerrml contains the length of the error message that is stored in sqlca.sqlerrm.sqlerrmc (the result of strlen(), not really interesting for a C programmer). Note that some messages are too long to fit in the fixed-size sqlerrmc array; they will be truncated.

    In case of a warning, sqlca.sqlwarn[2] is set to W. (In all other cases, it is set to something different from W.) If sqlca.sqlwarn[1] is set to W, then a value was truncated when it was stored in a host variable. sqlca.sqlwarn[0] is set to W if any of the other elements are set to indicate a warning.

    The fields sqlcaid, sqlcabc, sqlerrp, and the remaining elements of sqlerrd and sqlwarn currently contain no useful information.

    The structure sqlca is not defined in the SQL standard, but is implemented in several other SQL database systems. The definitions are similar at the core, but if you want to write portable applications, then you should investigate the different implementations carefully.

    29.9.3. SQLSTATE vs SQLCODE

    The fields sqlca.sqlstate and sqlca.sqlcode are two different schemes that provide error codes. Both are specified in the SQL standard, but SQLCODE has been marked deprecated in the 1992 edition of the standard and has been dropped in the 1999 edition. Therefore, new applications are strongly encouraged to use SQLSTATE.

    SQLSTATE is a five-character array. The five characters contain digits or upper-case letters that represent codes of various error and warning conditions. SQLSTATE has a hierarchical scheme: the first two characters indicate the general class of the condition, the last three characters indicate a subclass of the general condition. A successful state is indicated by the code 00000. The SQLSTATE codes are for the most part defined in the SQL standard. The PostgreSQL server natively supports SQLSTATE error codes; therefore a high degree of consistency can be achieved by using this error code scheme throughout all applications. For further information see Appendix A.

    SQLCODE, the deprecated error code scheme, is a simple integer. A value of 0 indicates success, a positive value indicates success with additional information, a negative value indicates an error. The SQL standard only defines the positive value +100, which indicates that the last command returned or affected zero rows, and no specific negative values. Therefore, this scheme can only achieve poor portability and does not have a hierarchical code assignment. Historically, the embedded SQL processor for PostgreSQL has assigned some specific SQLCODE values for its use, which are listed below with their numeric value and their symbolic name. Remember that these are not portable to other SQL implementations. To simplify the porting of applications to the SQLSTATE scheme, the corresponding SQLSTATE is also listed. There is, however, no one-to-one or one-to-many mapping between the two schemes (indeed it is many-to-many), so you should consult the global SQLSTATE listing in Appendix A in each case.

    These are the assigned SQLCODE values:

    -12 (ECPG_OUT_OF_MEMORY)

    Indicates that your virtual memory is exhausted. (SQLSTATE YE001)

    -200 (ECPG_UNSUPPORTED)

    Indicates the preprocessor has generated something that the library does not know about. Perhaps you are running incompatible versions of the preprocessor and the library. (SQLSTATE YE002)

    -201 (ECPG_TOO_MANY_ARGUMENTS)

    This means that the command specified more host variables than the command expected. (SQLSTATE 07001 or 07002)

    -202 (ECPG_TOO_FEW_ARGUMENTS)

    This means that the command specified fewer host variables than the command expected. (SQLSTATE 07001 or 07002)

    -203 (ECPG_TOO_MANY_MATCHES)

    This means a query has returned multiple rows but the statement was only prepared to store one result row (for example, because the specified variables are not arrays). (SQLSTATE 21000)

    -204 (ECPG_INT_FORMAT)

    The host variable is of type int and the datum in the database is of a different type and contains a value that cannot be interpreted as an int. The library uses strtol() for this conversion. (SQLSTATE 42804)

    -205 (ECPG_UINT_FORMAT)

    The host variable is of type unsigned int and the datum in the database is of a different type and contains a value that cannot be interpreted as an unsigned int. The library uses strtoul() for this conversion. (SQLSTATE 42804)

    -206 (ECPG_FLOAT_FORMAT)

    The host variable is of type float and the datum in the database is of another type and contains a value that cannot be interpreted as a float. The library uses strtod() for this conversion. (SQLSTATE 42804)

    -207 (ECPG_CONVERT_BOOL)

    This means the host variable is of type bool and the datum in the database is neither 't' nor 'f'. (SQLSTATE 42804)

    -208 (ECPG_EMPTY)

    The statement sent to the PostgreSQL server was empty. (This cannot normally happen in an embedded SQL program, so it may point to an internal error.) (SQLSTATE YE002)

    -209 (ECPG_MISSING_INDICATOR)

    A null value was returned and no null indicator variable was supplied. (SQLSTATE 22002)

    -210 (ECPG_NO_ARRAY)

    An ordinary variable was used in a place that requires an array. (SQLSTATE 42804)

    -211 (ECPG_DATA_NOT_ARRAY)

    The database returned an ordinary variable in a place that requires array value. (SQLSTATE 42804)

    -220 (ECPG_NO_CONN)

    The program tried to access a connection that does not exist. (SQLSTATE 08003)

    -221 (ECPG_NOT_CONN)

    The program tried to access a connection that does exist but is not open. (This is an internal error.) (SQLSTATE YE002)

    -230 (ECPG_INVALID_STMT)

    The statement you are trying to use has not been prepared. (SQLSTATE 26000)

    -240 (ECPG_UNKNOWN_DESCRIPTOR)

    The descriptor specified was not found. The statement you are trying to use has not been prepared. (SQLSTATE 33000)

    -241 (ECPG_INVALID_DESCRIPTOR_INDEX)

    The descriptor index specified was out of range. (SQLSTATE 07009)

    -242 (ECPG_UNKNOWN_DESCRIPTOR_ITEM)

    An invalid descriptor item was requested. (This is an internal error.) (SQLSTATE YE002)

    -243 (ECPG_VAR_NOT_NUMERIC)

    During the execution of a dynamic statement, the database returned a numeric value and the host variable was not numeric. (SQLSTATE 07006)

    -244 (ECPG_VAR_NOT_CHAR)

    During the execution of a dynamic statement, the database returned a non-numeric value and the host variable was numeric. (SQLSTATE 07006)

    -400 (ECPG_PGSQL)

    Some error caused by the PostgreSQL server. The message contains the error message from the PostgreSQL server.

    -401 (ECPG_TRANS)

    The PostgreSQL server signaled that we cannot start, commit, or rollback the transaction. (SQLSTATE 08007)

    -402 (ECPG_CONNECT)

    The connection attempt to the database did not succeed. (SQLSTATE 08001)

    100 (ECPG_NOT_FOUND)

    This is a harmless condition indicating that the last command retrieved or processed zero rows, or that you are at the end of the cursor. (SQLSTATE 02000)

    PrevHomeNext
    Using SQL Descriptor AreasUpIncluding Files
       
    © 1997-2005 PHP Club Team
    Rambler's Top100